HyBrex Handsets

Hybrex DK6-21 Digital Handset
DK6-21
New generation Hybrex handset in contemporary upright style.
Featuring : extensive DSS keys all dual colour LED lit, a larger dial pad for ease of use, large character two line LCD display for status and system messages, and other features expected on an executive style handset, this model represents style and facility whilst also being economical. Providing the quality of digital communications the DK6 utilises single pair wiring to the main equipment hence deployment over existing wiring is painless.Features:

    • The DK6-21 is the ‘executive’ model of the two available.
    • Body colour is charcoal, with a silver finish on the faceplate.
    • 36 programmable DSS keys all lit with bi-colour LED.
    • Hands free capable.
    • Headset port.
    • Adjustable stand – two positions.
    • Wall mountable.
    • Variable LCD contrast on GDS and G1E systems.
    • Melody ring tones on GDS
    • Modulated dial tone on GDS – to match the Australian network.
    • Designed for the G1E, and GDS systems, the DK6 also works on the G2 but with reduced functionality.

DK6-21-BT

 


Now available : DK6-21-BT with integrated Blue tooth for a superior wireless headset experience with your choice of Blue tooth headset or earpiece device. Blue tooth is version 2.0. See Headsets page for compatible equipment suggestions.

Hybrex DK6-31 Digital Handset

DK6-31 shown

The DK6-31 model bears all the design and functional aspects of the DK6 model in a version suited to situations where there are fewer DSS keys required. The retention of the large character two line LCD display on this model preserves the ability for the user to view relevant status and system messages such as Caller ID etc. The DSS keys are lit by bi-colour LEDs; hands free operation and a headset port are available; message lamp and adjust ability of volumes and ring tone are integrated; in fact all the normal features of the DK6 series are embodied in this model. As with other Hybrex digital series single pair wiring only is required.

Features:

  • The DK6-31 is the mid-range model.
  • Body colour is charcoal; faceplate finish is silver.
  • 18 programmable DSS keys all lit by bi-colour LEDs
  • Hands free capable.
  • Headset port.
  • Adjustable stand – two positions.
  • Wall mountable.
  • Melody ring tones on GDS
  • Modulated dial tone on GDS – to match the Australian network.
  • Designed for the G1E, and GDS systems, the DK6 also works on the G2 but with reduced functionality.

DK6-DSS Console

DK6-DSS Console Unit
The DSS console companion for a DK6 series handset in a reception/switch situation. Available in charcoal colour to match the DK6 series. The DK6-DSS console features 60 programmable system keys, lit by bi-colour LEDs, allowing a receptionist at-a-glance knowledge and control of an office telephone network.
If control of a larger network is required up to 8 DK6-DSS consoles can be connected. Requires only single pair wiring to a DK port on the main equipment per DSS console deployed.

DK6-21 Handset +  DK6-DSS Console unit
Hybrex DK7-21 Key phone

DK7-21 Keyphone

Specifications :

  • Ring / Message Indication Lamp.
  • 10 Dual Colour DSS Keys.
  • 14 Function Keys.
  • Speaker phone.
  • Hands free Calling.
  • Adjustable Volume Level for Handset / Speaker / Ringer.
  • 8 Ringer Frequencies.
  • Adjustable Dual-Angle Back Stand.

Physical :

Dimension (L x W x H) 220.5 x 176.5 x 90.5mm
Weight 680g
Body Material ABS
Colour Black
Mounting on Desk or Wall
Max / Min. Temperature (operating) 0º to 35º C
Max / Min. Temperature (storage) -30º to 66º C
Humidity 10% to 95% relative
Max. Loop Resistance
/ Impedance
< 40 Ohms
26 AWG/200m
The DK7-21 key phone is a new model recently released to complement the stable of Hybrex digital key phones. Compatible with all Hybrex “G” series systems, the DK7-21 provides a full range of features on these systems for a very modest outlay. Features such as : a large character 2 line LCD display so you are kept informed of call and phone status; 10 bi-colour DSS LEDs that allow presentation of line/group status, co-worker extension status, other system function status etc – all according to system programming; large format dial keypad for easy use and all the function keys necessary for easy call handling; normal, and hands free operation for voice; adjustable levels – pre-set and tone choice for ring, pre-set and dynamic for voice; and more.
With its two position back stand the DK7 can be adjusted to preference, and sits well on the desk allowing for full visibility and easy use. The 32 Character Display Shows :

  • Time (system real time clock).
  • Dialled Telephone Number.
  • Last Number Redial.
  • Speed Dial Number.
  • Speed Dial Directory.
  • Voice Mail – Messages Waiting.
  • CO Line Names.
  • Status of Operation/Function.
  • Absent Messages.
  • Calling Party Number and Name.
  • Phone / System Setting Values.

Key System Features Available:

  • Answering Machine Emulation.
  • Automatic-Answer Intercom.
  • Auto Attendant with Overflow.
  • Busy Lamp Field.
  • Barge-in.
  • Call Forward –Busy/No Answer/All calls.
  • Call Transfer.
  • CLI on Both External and Internal.
  • Conference.
  • Do Not Disturb.
  • Music On Hold – Recordable.
  • Paging (All / Zone / Meet Me).
  • Pick Up Groups.
  • Programmable DSS keys.
  • Single Digit Dialling.
  • Trunk Queuing.
  • and many more …..
Hybrex DK8-21 Digital Handset

DK8-21
* UNIQUE *
Full Touch Interface
Key phone.
The Hybrex DK8 is a unique new concept next generation digital key phone with a fully Touch driven – no moving parts – interface. This new design phone has a very slim profile body resulting in a contemporary look and feel. Incorporating a removable stand the phone can be mounted in two positions on the desk – approx 60 or 45 degrees slope – or wall mounted without the need for any special kit. It has DSS keys with bi-colour LED – 22 of them – as expected for Hybrex key phone – giving access to the full range of functions inherent in Hybrex systems according to their programming. The 21 model has a 4 line LCD display, in an attractive and easy to read reverse backlit blue colour, providing more than adequate call information.
Along with the normal controls for volumes etc, the phone has Full Duplex Hands free mode, and provides two options (ports) for headset connection. These are one for a standard wired headset, and one for Electronic Hook switch (EHS) – in the industry standard DHSG format for seamless integration with compatible wireless headsets without the need for a lifter fitted to the phone. As with other Hybrex DK phones the DK8 is connected to the main equipment via single pair wiring so deployment over existing wiring is painless.Features:

    • The DK8-21 is the ‘executive’ model of the two available.
    • All “Touch” Keys, including hook switch.
    • Four Line LCD display in reverse backlit Blue colour.
    • Body colour is satin textured black.
    • 22 programmable DSS keys all lit with bi-colour LED.
    • Full Duplex Hands free.
    • Headset port 1 – std wired.
    • Headset port 2 – DHSG EHS for seamless integration with wireless headset
    • Adjustable stand – two positions.
    • Wall mountable.
    • Ring and Message LED at top of phone body
    • Adjustable Ring Frequency (8) and Gradual Ring programmable.
    • Adjustable Volume level for Handset / Headset / Speaker / Ringer
    • Modulated dial tone on GDS – to match the Australian network.
    • Phone identified as DK6 to older systems so is legacy system compatible
Hybrex DK8-31 Digital Handset

DK8-31
* UNIQUE *
Full Touch Interface
Key phone.
The DK8-31 model bears all the design and functional aspects of the DK8-21 model (see above descriptions) with a couple of exceptions:
The DK8-31 model has a 2 line LCD display – reverse backlit in a black and white format, and headset capability is wired headset port only – No EHS.Features:

    • The DK8-31 is the ‘standard’ model of the two available.
    • All “Touch” Keys, including hook switch.
    • Two Line LCD display in reverse backlit White on Black colour.
    • Body colour is satin textured black.
    • 22 programmable DSS keys all lit with bi-colour LED.
    • Full Duplex Hands free.
    • Headset port 1 – std wired.
    • Adjustable stand – two positions.
    • Wall mountable.
    • Ring and Message LED at top of phone body
    • Adjustable Ring Frequency (8) and Gradual Ring programmable.
    • Adjustable Volume level for Handset / Headset / Speaker / Ringer
    • Modulated dial tone on GDS – to match the Australian network.
    • Phone identified as DK6 to older systems so is legacy system compatible
Hybrex DK9-25 Digital Handset

DK9-25

Specifications :

  • Multi-Line 32chr Backlit LCD Display.
  • 25 Dual Colour DSS Keys.
  • 33 Function Keys.
  • Ring / Message Indication Lamp.
  • 8 Ringer Frequencies
  • 8 Polyphonic Ring Tones.
  • Adjustable Volume Level for Handset / Speaker / Ringer.
  • Hands free Calling.
  • Headset Jack.
  • Speaker phone.
  • Tilt Angle Adjustable LCD Panel.

Physical :

Dimension (L x W x H) 295 x 162 x 160 mm
Weight 1980g
Body Material ABS
Color Black
Mounting on Desk
Max / Min. Temperature (operating) 0º to 45º C
Max / Min. Temperature (storage) -30º to 66º C
Humidity 10% to 95% relative, non condensing
Max. Loop Resistance
/ Impedance
< 40 Ohms
26 AWG/200m
New generation Hybrex executive model digital desk handset.
Featuring : 25 DSS keys with dual colour LEDs individually programmable for usage as DSS / BLF or system feature keys; sizeable 32 character wide multi-line backlit LCD display for good visibility of status and system messages, with bezel mounted soft keys for context relative operation choices; large easy to use dial pad plus a full complement of dedicated function keys for complete operational control. Providing quality digital audio and communications the DK9-25 is connected to the main equipment with single pair wiring so deployment over existing wiring is painless.Multi line LCD Display shows :

    • Absent Messages.
    • Call Logs.
    • Calling Party Number and Name.
    • CO Line Names.
    • Dialled Telephone Number.
    • Last Number Redial.
    • Menu Keys.
    • Phone / System Setting Values.
    • Speed Dial Directory.
    • Speed Dial Number.
    • Status of Operation/Function.
    • Time.
    • Voice Mail Message Notification.

Compatibility:

  • Compatible with the newer Hybrex GDS and G1E+M systems with MPUN processor.
  • Compatible with previous GDS and G1E+M systems with MPU processor, with possible operational differences.
  • Compatible with G1E+ systems but with limited Display functionality, and possible operational differences.
  • Update of system software may be required for compatibility assurance.
  • NOT compatible with older Hybrex G1 and G2 systems.

Key System Features

  • Answering Machine Emulation
  • Automatic-Answer Intercom
  • Auto Attendant with Overflow
  • Auto Redial
  • Busy Lamp Field
  • Barge-in
  • Call Forward –Busy/No Answer/All calls
  • Call Transfer
  • CLI on Both External and Internal
  • Conference
  • Music On Hold– Recordable
  • Paging Internal and Meet me
  • Pick Up Groups
  • Programmable DSS keys
  • Single Digit Dialling
  • Station Hunting
  • …and many more!
Hybrex DK9-15 Digital Handset

DK9-15

Specifications :

  • Dual Line 32chr Backlit LCD Display.
  • 12 Function Keys.
  • 15 Dual Colour DSS Keys.
  • 8 Ringer Frequencies
  • 8 Polyphonic Ring Tones.
  • Ring / Message Indication Lamp.
  • Adjustable Volume Level for Handset / Speaker / Ringer.
  • Hands free Calling.
  • Headset Jack.
  • Speaker phone.
  • Tilt Angle Adjustable LCD Panel.

Physical :

Dimension (L x W x H) 295 x 120 x 160 mm
Weight 950g
Body Material ABS
Colour Black
Mounting on Desk
Max / Min. Temperature (operating) 0º to 45º C
Max / Min. Temperature (storage) -30º to 66º C
Humidity 10% to 95% relative, non condensing
Max. Loop Resistance
/ Impedance
< 40 Ohms
26 AWG/200m

The DK9-15 model presents all the core design and functional aspects of the DK9 series for use in the larger number of situations where fewer DSS keys are required and the information provided by a two line display is ample for the user. The LCD display is backlit with mid character sizing for good visibility and with two lines of 32 characters each provides the relevant information needed for a phone : caller ID, dialled number, call status, system messages, voice mail/message waiting, clock, and more. The 15 DSS keys are lit with bi-colour LEDs and system programmable for usage as DSS / BLF or system feature keys. The dial pad is easy to use as are the complement of dedicated function keys, making the DK9-15 a convenient and economical key phone. As with other Hybrex digital series phones single pair only wiring is required.

Dual Line LCD Display shows :

  • Absent Messages.
  • Call Logs.
  • Calling Party Number and Name.
  • CO Line Names.
  • Dialled Telephone Number.
  • Last Number Redial.
  • Phone / System Setting Values.
  • Speed Dial Directory.
  • Speed Dial Number.
  • Status of Operation/Function.
  • Time.
  • Voice Mail Message Notification.

Compatibility:

  • Compatible with the newer Hybrex GDS and G1E+M systems with MPUN processor.
  • Compatible with previous GDS and G1E+M systems with MPU processor, with possible operational differences.
  • Compatible with G1E+ systems with possible operational differences.
  • Update of system software may be required for compatibility assurance.
  • NOT compatible with older Hybrex G1 and G2 systems.

Key System Features

  • Key System features are equivalent to DK9-25 – see above

DK9-DSS Console

DK9-DSS Console Unit

Features:

  • 30 DSS keys with bi-colour LEDs.
  • M keys allow mapping of second set of key assignments.
  • Free standing or bracket mount to DK9 handset.

The DK9-DSS console is the companion for a DK9 series handset in a reception/switch situation. Also usable in other situations if required.
This console is colour and form matched to the DK9 series handsets, and features 30 programmable DSS keys with bi-colour LEDs, allowing at a glance knowledge and control of an office telephone network.
Keys are individually programmable, via system DSS key plan, for station BLF / DSS or system function . Memory keys allow on-the-fly use of second set of key mappings from the assigned key plan. The number of consoles with differing key-maps deployable is regulated by key plans available, which is relative to the system in use: 1 key plan on G1E plus, 8 key plans on GDS160, 20 key plans on GDS320, and so on upwards. The absolute number of consoles that can be deployed is only limited by system port availability. In addition to these key plan notes, system compatibility of this console is as per notes in the DK9-15 section above.

Console units can be free standing but are designed to be integrated with a DK9 handset using a sturdy bracket mount. Additional console units can be attached in the same fashion if required.
Wiring requirements are a single pair to the system and a digital system port per console deployed. When partnered with a DK9 phone the first console connection can be made via the phone thereby minimising the number of cables required.

DK9-25 Handset +  DK9-DSS Console unit

DK9-15 Handset +  DK9-DSS Console unit
Hybrex IP38-61 IP Key phone

IP38-61 IP Key phone

The IP38-61 IP Key phone is a system integral SIP IP phone designed to be connected to a Hybrex ISU card in a GDS or G1E+M system, via a broadband Internet, or Intranet, connection. An IP38-61, when connected so, behaves in a functionally equivalent way to a standard system digital key phone. All the same features and functionality of a standard DK handset are available to the user, in fact the direct point of reference here is it’s brother the DK6-21 on which the IP38-61 fascia is based. This is remarkable in that, since the link is a via broadband IP network, this feature set can be presented to locations geographically remote to the main system.

Physical Features:

  • Body colour is charcoal, with a silver finish on the faceplate.
  • Large, Backlit LCD display, 2 Line x 16 Chr. Contrast adjustable.
  • 36 system programmable DSS keys all lit with bi-colour LED.
  • Standard dial pad plus 8 function keys (4 with LED indicator).
  • Full hands free operation available with high quality performance.
  • Headset socket (2.5mm).
  • Adjustable multi-purpose stand – two desk positions, or wall mtg. position.
  • User control over audio levels of speaker, earpiece, mic, and camp-on tone.
  • User control over ring level, style, and frequency.
  • Message/Voice Mail Indicator – hi-visibility Red LED.
  • Available in standard, or POE version.

Functional Features:

  • Call Transfer.
  • Conference
  • Call Splitting.
  • Automatic Answer – Intercom.
  • Call Pick-up.
  • Call Forward.
  • Redial.
  • One Touch Dialling.
  • Do Not Disturb.
  • Trunk Queuing.
  • Barge-In / Monitor.
  • Paging (All / Zone).
  • Receive Paging.
  • and more …..

 

Hybrex ACD20 Access Control Device
 

The new Hybrex ACD20 is an RFID device designed to allow unattended portal access to authorised personnel by RFID card/fob swipe, and according to system programming for card, door – or other unit/function, and time of day.
The ACD20 contains a MiFare RFID reader/writer, a relay for control of master door relay or other device, and two sensor inputs. The sensors can be used for a remote switch door open function – like a push button inside the premises, or other uses according to system programming. MiFare RFID cards and key-fobs are available from Hybrex, and must be registered with the system to be valid. The ACD20 is designed for wall mounting, is IP44 rated, has a disconnect alarm, and is small and unobtrusive – being sized to fit a normal door jamb. It has LED illuminated logo and card indicator for easy visibility in low light and at night. The card indicator and an internal sounder provide feedback on card swipe status.
The ACD20 is a digital device connected and powered via a single pair from the main equipment and is compatible with all current Hybrex G Series systems.

Features :

  • Integrated Mifare reader/writer
  • Relay with NO/NC contacts for control of other equipment
  • Two sensor inputs for programmable usage
  • Illuminated logo and card indicator for low light / night visibility
  • Visual and audible feedback of card swipe status
  • Self-defence (un-plug) alarm
  • Powered and operated by single pair digital wiring from system
    (nb. this is not including any relay/sensor wiring)

Electr

ical Specification :

  • Output : SPDT Relay : Contact Rating 1A / 30VDC
  • Input : 2 x Sensor Cct : Dry Connection :
    – Open loop > 470KOhm; Closed loop < 100 Ohm.
  • Powered from system (35~40VDC); Consumption : 100mA

Mechanical Specification :

  • Body Material : …. ABS
  • Standards : ……… IP 44
  • Colour :………………. Black
  • Mounting : ……….. Wall Mounting
  • Dimension : ……. 99.6 L x 40 W x 24.6 H (mm.)
  • Weight : …………… 85g (net)
Environmental Specification :

  • Max / Min. Temperature (operating) :
    0º to 40º C
  • Max / Min. Temperature (storage) :
    -40º to 66º C
  • Humidity :
    0 to 95% relative
Hybrex ACP-40 Door phone

The Hybrex ACP40 is a fully featured door phone / intercom with a touch interface.
Housed in an aluminium case with a sealed front fascia and rear facing speaker, the ACP40 is IP44 rated meaning it is weather resistant and therefore suitable for sheltered exterior use if required. The aluminium case is finished in a deep blue varnish and the fascia is black. The ACP40 is equipped with a high visibility two line OLED display for status and messages, and a dial pad and function button set consisting of directory, program, and Call buttons. All buttons are backlit for easy use in low light conditions and provide audible and visual confirmation of use along with display messaging.

The ACP40 includes an integrated MiFare RFID reader allowing MiFare cards or tags to be used to automatically trigger the door relay – according to system programming – so allowing the ACP40 to also provide unattended portal access to authorised personnel if desired. According to system programming portal access can be configured to allow door relay operation by entry of a numeric code via the keypad, MiFare card read, or both methods together if required.

The ACP40 is a digital device connected and powered via a single pair from the main equipment and is compatible with all current Hybrex G Series systems.
The ACP40 has two sets of dry relay contacts to control devices – such as door lock solenoid and a camera or light for example, plus a sensor for uses such as alarm, and includes self defence features such as a case open alarm and an unplug alarm.

Feature List :

  • Built-In Mifare reader
  • Keypad: Touch sensitive dial pad, function buttons, and call button
  • Intercom for indoors use
  • Door control
  • Door status indication
  • Self-defence (un-plug) alarm
  • Case open alarm
  • One relay will activate immediately an Intercom Call is initiated and remain
    active for the duration of the call.
  • Keypad, function, and Call buttons backlit for easy low light use
  • 8 level speaker volume – controlled by system programming
  • 8 level microphone volume – controlled by system programming
  • Remote volume adjustment
  • Power over Line (PoL)

Audio Specification

  • Electronic bell:    88 dB +/- 3dB at 0.5 m
  • Speaker frequency range:    350 to 3400 Hz
  • Conversation mode:    Hands-Free Half Duplex

Mechanical Specification :

  • Body Material : …. Aluminium
  • Standards : ……… IP 44
  • Colour :………………. Black and Blue
  • Mounting : ……….. Wall Mounting
  • Dimension : 182 L x 94 W x 36 H (mm)                        (with rubber pad)
  • Weight : …………. 628g (net)

Environmental Specification :

  • Max / Min. Temperature (operating) :
    0º to 40º C
  • Max / Min. Temperature (storage) :
    -40º to 66º C
  • Humidity :
    0 to 95% relative
Hybrex ACP-30 Door phone
 

Mechanical Specification :

  • Body Material : …. Aluminium
  • Standards : ……… IP 44
  • Colour :………………. Black and Blue
  • Mounting : ……….. Wall Mounting
  • Dimension : 130 L x 65.5 W x 33 H (mm)                        (with rubber pad)
  • Weight : …………. 282.4g (net)

Environmental Specification :

  • Max / Min. Temperature (operating) :
    0º to 40º C
  • Max / Min. Temperature (storage) :
    -40º to 66º C
  • Humidity :
    0 to 95% relative
The Hybrex ACP30 is a single button door phone / intercom with a touch interface.
Housed in an aluminium case with a sealed front fascia and rear facing speaker, the ACP30 is IP44 rated meaning it is weather resistant and therefore suitable for sheltered exterior use if required. The aluminium case is finished in a deep blue varnish and the fascia is black. The call button and logo are backlit in blue for easy visibility in low light or darkness and the call button back light changes to white in the active state.The ACP30 is a digital device connected and powered via a single pair from the main equipment and is compatible with all current series Hybrex G Series systems. The ACP30 has two sets of dry relay contacts to control devices – such as door lock solenoid and a camera for example, plus a sensor for uses such as alarm, and includes self defence features such as a case open alarm and an unplug alarm.

The ACP30 is available in two models : the ACP30-D which is as above, and the ACP30-RFID which has an integrated MiFare reader allowing MiFare cards or tags to be used to automatically trigger the door relay – according to system programming – so allowing the ACP30 to also provide unattended portal access to authorised personnel if desired.

Feature List :

  • Built-In Mifare reader – (ACP30-RFID model only)
  • Keypad: Touch sensitive call button
  • Intercom for indoors use
  • Door control
  • Door status indication
  • Self-defence (un-plug) alarm
  • Case open alarm
  • One relay will be activated immediately after initialising the Intercom Call – and will remain active for the duration of the call.
  • Button illuminated by backlit lamp for night use
  • 8 level speaker volume – controlled by system programming
  • 8 level microphone volume – controlled by system programming
  • Power over Line (PoL)

Audio Specification

  • Electronic bell:    88 dB +/- 3dB at 0.5 m
  • Speaker frequency range:    350 to 3400 Hz
  • Conversation mode:    Hands-Free Half Duplex
Hybrex Access Control Phone
ACP also available in weather resistant form : Stainless steel front panel, with mount options of hooded stainless surface mount case, or flush mount enclosure.
(Std ACP shown for comparison)
We call it the ACP – short for Access Control Phone – it is a door phone like device with many more functions than your average door phone. A digital system device fed by single pair from any Hybrex G series system, the standard ACP is designed for use in sheltered or indoor situations, with exterior versions available.
The functionality of the ACP includes the following :

  • Displays system time when in the idle state; key/operation status during use.
  • Call button rings extensions with tone and displayed door name – all programmable.
  • Call to any extension by number, or even external lines (conditional).
  • RFID detector for proximity card or fob, dry contact relay to drive electric door lock.
  • Door entry by RFID card swipe, or numeric code entry, or both if required.
  • Another relay, and sensor, to detect alarm status and/or activate alarm or siren.
  • Behaves like other digital phones – hands free intercom/answer etc.

The ACP has many different uses: as a door phone at front or back door; normal wall mount phone with hands free answer back; two-way speaker; security control panel and access control device.
Card access by door phone, time of day, day of week, is programmable within the Hybrex system. When used in conjunction with the free Hybrex “Access Manager” software additional features are provided such as pertinent access logs, etc.
The ACP provides an elegant solution to security, for your business or home.

RFID keys available in card or key-fob format.